Wednesday 11 June 2014

Under Water Putty - (Zero-Down-Time UWP)

All Purpose Engineering Repairs - Under Water Putty. High performance alloy reinforced epoxy putty, engineered to make precision repairs to critical stress bearing equipment. Used to protect new or repaired surfaces from cavitation, erosion and corrosion. 




Features of Under Water Putty

  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance
  • Good resistance to corrosion and abrasion
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Resistant to chemicals and most acids, bases, solvents, and alkalisthat can be easily Can be machined, drilled, tapped or painted Superior adhesion – forms a solid bond to steel, cast iron,stainless steel, concrete, and clean and abraded bronze,copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
 

Express Titanium Putty - (Zero-Down-Time ETP)

All Purpose Engineering Repairs - Express Titanium Putty. High performance alloy reinforced epoxy putty, engineered to make precision repairs to critical stress bearing equipment. Used to protect new or repaired surfaces from cavitation, erosion and corrosion. 





Features of Titanium Putty :
The key feature are: Rehabilitation instead of replacement, Safety enhancement as no dangers of hot work, In-situ application - do jobs right on production line, fast and economical repairs, ease in application procedures, permanent solutions to countless applications, increased reliability, reduce the cost of plant shutdown, match metal color, excellent resistance to aggressive chemicals, high compressive strength for mechanical applications.
 

Where to Use?

  • Overhaul of worn pumps and valves
  • Repairs of wearing plates, shafts, keyways, flanges, bushings, housings and propellers
  • Pipeline leakage repair
  • Refurbishment of complex alloys
  • Renewing cracked battery cases
  • Reclamation of leaking storage tanks
  • Restoring worn surfaces
  • Repairs heat exchangers , compressors and oil coolers
  • Reclamation of blowers and digesters

High Temperature Ceramic Putty - (SavesPast HTCP)


Rebuilding putty for tough wear and high temperature resistance till 230°C
A two component paste general purpose ceramic-filled epoxy system based on high temperature resistance special resin .The ceramic putty is used to repair high wear areas against sliding abrasion /erosion of processing equipment's , interfacing metallic, low-friction surfaces and extends wear life for high temperature service conditions. Ideally used for scrubbers, cyclones, dust collectors, and fan housings. The high temperature putty requires post-curing for proper performance and temperature resistance.
 
 

Features of High Temperature Ceramic Putty

  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance
  • Good resistance to corrosion and abrasion
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining
  • Resistant to chemicals and most acids, bases, solvents, and alkalis
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC's
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost

Where to Use?

  • Overhaul of worn pumps and valves
  • Repairs of wearing plates, shafts, keyways, flanges, bushings, housings and propellers
  • Pipeline leakage repair
  • Refurbishment of complex alloys
  • Renewing cracked battery cases
  • Reclamation of leaking storage tanks
  • Restoring worn surfaces
  • Repairs heat exchangers , compressors and oil coolers
  • Reclamation of blowers and digesters

Stainless Steel Putty - (SavesPast SSP)


Repair of Stainless Steel parts/castings and food processing equipments
A two component paste, based on a stainless steel powder filled epoxy system. The non-rusting, non magnetic dependable inert putty extensively used for fairing, repair, filling or patching of stainless steel fittings, components, castings and equipment especially at hygiene conscious facilities or chemical processing applications. SHELF LIFE Store away from heat and direct sunlight. A minimum of 3 years should be expected if held in original unopened containers 
 
 
 

Features of Stainless Steel Putty

  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance
  • Good resistance to corrosion and abrasion
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining
  • Resistant to chemicals and most acids, bases, solvents, and alkalis
  • It can be easily Can be machined, drilled, tapped or painted
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC's
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost

Where to Use?

  • Overhaul of worn pumps and valves
  • Repairs of wearing plates, shafts, keyways, flanges, bushings, housings and propellers
  • Pipeline leakage repair
  • Refurbishment of complex alloys
  • Renewing cracked battery cases
  • Reclamation of leaking storage tanks
  • Restoring worn surfaces
  • Repairs heat exchangers , compressors and oil coolers
  • Reclamation of blowers and digesters

Copper Putty - (SavesPast CUP)


Repair of Copper parts/castings
A two component paste, based on a copper powder filled epoxy system. The non-rusting, non magnetic dependable inert putty extensively used for fairing, repair, filling or patching of copper castings and equipment where copper finish is desired. 
 
 
 

Features of Copper Putty

  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance
  • Good resistance to corrosion and abrasion
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining
  • Resistant to chemicals and most acids, bases, solvents, and alkalis
  • It can be easily Can be machined, drilled, tapped or painted
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC's
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost
  

Where to Use?

  • Overhaul of worn pumps and valves
  • Repairs of wearing plates, shafts, keyways, flanges, bushings, housings and propellers
  • Pipeline leakage repair
  • Refurbishment of complex alloys
  • Renewing cracked battery cases
  • Reclamation of leaking storage tanks
  • Restoring worn surfaces
  • Repairs heat exchangers , compressors and oil coolers
  • Reclamation of blowers and digesters

Bronze Putty - (SavesPast BP)


Repair of Bronze parts/ castings
A two component paste, based on a bronze powder filled epoxy system. The non-rusting, non magnetic dependable inert putty extensively used for fairing, repair, filling or patching of bronze castings and equipment where bronze finish is desired and where brazing is undesirable or impossible. 
 
 
 

Features of Bronze Putty

  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance
  • Good resistance to corrosion and abrasion
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining
  • Resistant to chemicals and most acids, bases, solvents, and alkalis
  • It can be easily Can be machined, drilled, tapped or painted
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC's
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost
 

Where to Use?

  • Overhaul of worn pumps and valves
  • Repairs of wearing plates, shafts, keyways, flanges, bushings, housings and propellers
  • Pipeline leakage repair
  • Refurbishment of complex alloys
  • Renewing cracked battery cases
  • Reclamation of leaking storage tanks
  • Restoring worn surfaces
  • Repairs heat exchangers , compressors and oil coolers
  • Reclamation of blowers and digesters

Aluminium Putty - (SavesPast AP)


Repair of Aluminium parts/castings
A two component paste, based on a aluminium powder filled epoxy system. The non-rusting, non magnetic dependable inert putty extensively used for fairing, repair or patching of aluminium castings and equipment where aluminum finish is desired. 
 
 
 

Features of Aluminium Putty

  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance
  • Good resistance to corrosion and abrasion
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining
  • Resistant to chemicals and most acids, bases, solvents, and alkalis
  • It can be easily Can be machined, drilled, tapped or painted
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC's
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost

Where to Use?


  • Overhaul of worn pumps and valves
  • Repairs of wearing plates, shafts, keyways, flanges, bushings, housings and propellers
  • Pipeline leakage repair
  • Refurbishment of complex alloys
  • Renewing cracked battery cases
  • Reclamation of leaking storage tanks
  • Restoring worn surfaces
  • Repairs heat exchangers , compressors and oil coolers
  • Reclamation of blowers and digesters