2013 ~ Metal Reclamation Putty

Friday 22 November 2013

ID Fan Repair putty

ID Fan Repair putty

We are the Manufacturer's of ID Fan Repair putty in India, We are supply the Product All over the world. If you have ever had to make an emergency repair on a broken pipe, you will truly appreciate this unique pipe repair product. Without the use of tools, you may be able to repair the break or leak in your copper, steel, plastic, cast iron, or rubber pipe - in minutes.

Monarch's ID Fan Repair putty Features:

Permanently repair most ID Fans,pipes/fittings or hose in minutes.
Applies like tape, sets like steel
Works on pipe of nearly any material, including copper, steel, plastic, cast iron, rubber
Includes everything you need but water - No tools needed.
Economic and easy to use kit used for repairing leaking pipes.

Heat Exchangers Repair Putty

Heat Exchangers Repair Putty

We are the Manufacturer's of Heat Exchangers Repair Putty in India, We are supply the Product All over the world. If you have ever had to make an emergency repair on a broken pipe, you will truly appreciate this unique pipe repair product. Without the use of tools, you may be able to repair the break or leak in your copper, steel, plastic, cast iron, or rubber pipe - in minutes.

Monarch's Heat Exchangers Repair Putty Features:

Permanently repair most pipes/fittings or hose in minutes.
Applies like tape, sets like steel
Works on pipe of nearly any material, including copper, steel, plastic, cast iron, rubber
Includes everything you need but water - No tools needed.
Economic and easy to use kit used for repairing leaking pipes.

Pipes Repair Putty

Pipes Repair Putty

We are the Manufacturer's of Pipes Repair Putty in India, We are supply the Product All over the world. If you have ever had to make an emergency repair on a broken pipe, you will truly appreciate this unique pipe repair product. Without the use of tools, you may be able to repair the break or leak in your copper, steel, plastic, cast iron, or rubber pipe - in minutes.

Monarch's Pipes Repair Putty Features:

Permanently repair most pipes/fittings or hose in minutes.
Applies like tape, sets like steel
Works on pipe of nearly any material, including copper, steel, plastic, cast iron, rubber
Includes everything you need but water - No tools needed.
Economic and easy to use kit used for repairing leaking pipes.

Pump Casings Repair Putty

Pump Casings Repair Putty

Industrial liquid handling pumps are classified in many different ways. Pumps are distinguished by the materials of construction, the materials pumped, industries or applications served, pressure, flow levels and physical orientation. Pump parts encounter numerous phenomenon’s which cause premature failure of numerous parts within the pumping mechanism. Several factors contribute to the constant abrasion, erosion and corrosion pump parts. we provide complete repair, restoration and reconditioning of pump parts.

Features

Abrasion Resistance
Corrosion
Wear and Tear Resistance

Recommended Applications

Pump casings
Housings
Impeller fins
Seal sections
Wear rings
Plungers
Pump shafts

Rubber Part Repair Putty

Rubber Part Repair Putty

This high performance two-part urethane was developed to repair critical operating equipment faster, more reliably and with greater ease than before. Rubber Repair Putty is an adhesive, sealant and repair compound all in one convenient, self-mixing system. Extremely tough and fast curing, it forms permanent bonds to rubber, urethane, PVC, metal, glass, masonry and plastics. Its excellent flexibility and elongation properties make it suitable as a sealant in the most demanding environments. And, the system's no-measure, self-mixing features make it extremely convenient for fast, on-site repairs, especially to conveyor belts and other rubber parts exposed to weather and extreme wear.

Recommended Applications of Rubber Repair Putty:

Repairing conveyor belts.
Repairing or rebuilding rubber liners in mills, pumps, feeder bowls, hoppers, chutes, and fans.
Repairing cast urethane screens and liners.
Forming tough, flexible bonds to metal, rubber, and masonry parts.

Rubber Repair Putty

This high performance two-part urethane was developed to repair critical operating equipment faster, more reliably and with greater ease than before. Rubber Repair Putty is an adhesive, sealant and repair compound all in one convenient, self-mixing system. Extremely tough and fast curing, it forms permanent bonds to rubber, urethane, PVC, metal, glass, masonry and plastics. Its excellent flexibility and elongation properties make it suitable as a sealant in the most demanding environments. And, the system's no-measure, self-mixing features make it extremely convenient for fast, on-site repairs, especially to conveyor belts and other rubber parts exposed to weather and extreme wear.

Recommended Applications of Rubber Repair Putty:

Repairing conveyor belts.
Repairing or rebuilding rubber liners in mills, pumps, feeder bowls, hoppers, chutes, and fans.
Repairing cast urethane screens and liners.
Forming tough, flexible bonds to metal, rubber, and masonry parts.

All Purpose Repair Putty is a two-part adhesive consisting of an epoxy resin putty and a hardener putty which are mixed by kneading. They react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. Monarch’s All Purpose Repair Putty does not shrink and is resistant to most common solvents. It can bond to damp surfaces and cure under water. Monarch’s All Purpose Repair Putty can be sanded, drilled and painted.

Recommended Application of All Purpose Repair Putty

Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive parts, pools and cracks in concrete.
Bonding metal, masonry, brick, wood, glass, ceramic, rubber, fiberglass composite, china, stone, marble and many rigid plastics.

Multipurpose Repair Putty is a two-part adhesive consisting of an epoxy resin putty and a hardener putty which are mixed by kneading. They react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. Monarch’s Multipurpose Repair Putty does not shrink and is resistant to most common solvents. It can bond to damp surfaces and cure under water. Monarch’s Multipurpose Repair Putty can be sanded, drilled and painted.

Recommended Application of Multipurpose Repair Putty

Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive parts, pools and cracks in concrete.
Bonding metal, masonry, brick, wood, glass, ceramic, rubber, fiberglass composite, china, stone, marble and many rigid plastics.

Wall Care Putty

Walls may have slight surface irregularities and imperfections such as holes, dents and cracks. Apply a coat of good exterior-durable putty to cover the minor surface problem and to help smoothen the wall surface. For larger dents and cracks use a mixture of cement and sand or a good quality crack filling product. Wall Care Putty is recommended to even out the surface and give a more pleasing finish. This is a specially designed product based on white cement. It can be used for filling and levelling surface imperfections on rough cement plasters, thus providing a smooth and uniform finish for subsequent painting. Recommended for uneven surfaces.

Wall Care Putty Product Feature's:

Monarch's Wall care Putty offers you total protection against flaking.
Its superior quality makes it the only putty in India to meet global standards.
As a white cement-based putty, it binds strongly with the base plaster, even if the surface is damp, and forms a protective base.

It fills up the fine pores in the walls and ceiling, giving you a smooth and dry surface for painting on.
With an effective protection against flaking, you are assured of a good looking home for years to come.
Protection to Expensive Paints.
Suitable for both internal and external walls.

Areas of Application of Monarch’s Wall Care Putty:

Ideal for finishing and decorating exterior and interior walls of all kinds.
Can be used on fresh and old-painted walls (after removing the existing paint and base coat).
It's perfect for homes, offices, bungalows, outhouses, farmhouses, stadiums, shopping malls, technology parks, educational institutes, airports, railway stations, theatres, exhibition halls, flyover walls etc.

Heat Resistant Metal Repair Putty is a fast setting, industrial strength compound that enables permanent repairs to anything made of steel or other metals. It does not shrink and is resistant to most common solvents. It can be sanded, drilled and painted after 60 minutes. Each stick of putty contains pre-measured portions of resin and hardener throughout therefore no measuring or mixing tools are necessary. Both components react to produce a hard, tough, permanent and waterproof bond on a wide range of materials

Recommended Application of Heat Resistant Metal Repair Putty

To repair iron pipes, tanks, tools, stripped threads, molds and duct work.
To bond aluminum, iron, steel, wood and masonry.
Rebuilding small engine parts, sealing leaks and filling cracks and voids in metal.

Epoxy Putty is a fast setting, industrial strength compound that enables permanent repairs to anything made of steel or other metals. It does not shrink and is resistant to most common solvents. It can be sanded, drilled and painted after 60 minutes. Each stick of putty contains pre-measured portions of resin and hardener throughout therefore no measuring or mixing tools are necessary. Both components react to produce a hard, tough, permanent and waterproof bond on a wide range of materials

Recommended Application of Epoxy Putty

To repair iron pipes, tanks, tools, stripped threads, molds and duct work.
To bond aluminum, iron, steel, wood and masonry.
Rebuilding small engine parts, sealing leaks and filling cracks and voids in metal.

Metal Repair Compound is a fast setting, industrial strength compound that enables permanent repairs to anything made of steel or other metals. It does not shrink and is resistant to most common solvents. It can be sanded, drilled and painted after 60 minutes. Each stick of putty contains pre-measured portions of resin and hardener throughout therefore no measuring or mixing tools are necessary. Both components react to produce a hard, tough, permanent and waterproof bond on a wide range of materials

Recommended Application of Metal Repair Compound

To repair iron pipes, tanks, tools, stripped threads, molds and duct work.
To bond aluminum, iron, steel, wood and masonry.
Rebuilding small engine parts, sealing leaks and filling cracks and voids in metal.

Metal Repair Putty is a fast setting, industrial strength compound that enables permanent repairs to anything made of steel or other metals. It does not shrink and is resistant to most common solvents. It can be sanded, drilled and painted after 60 minutes. Each stick of putty contains pre-measured portions of resin and hardener throughout therefore no measuring or mixing tools are necessary. Both components react to produce a hard, tough, permanent and waterproof bond on a wide range of materials

Recommended Application of Metal Repair Putty

To repair iron pipes, tanks, tools, stripped threads, molds and duct work.
To bond aluminum, iron, steel, wood and masonry.
Rebuilding small engine parts, sealing leaks and filling cracks and voids in metal.

Epoxy Cold Welding Compound is a 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 149°c intermittent. Over 3,000 PSI shear strength on steel.

Suggested Applications

Automotive
Marine
Heavy Duty
Aluminum, steel, brass, bronze, castings and stampings

Cold Welding Bonding Compound is a 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 149°c intermittent. Over 3,000 PSI shear strength on steel.

Suggested Applications
Automotive
Marine
Heavy Duty
Aluminum, steel, brass, bronze, castings and stampings

What is Cold Welding?

Cold or contact welding is a solid-state welding process in which joining takes place without fusion/ heating at the interface of the two parts to be welded. Unlike in the fusion-welding processes, no liquid or molten phase is present in the joint

Cold Welding Compound is a 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 149°c intermittent. Over 3,000 PSI shear strength on steel.

Suggested Applications

Automotive
Marine
Heavy Duty
Aluminum, steel, brass, bronze, castings and stampings

What is Cold Welding?

Cold or contact welding is a solid-state welding process in which joining takes place without fusion/ heating at the interface of the two parts to be welded. Unlike in the fusion-welding processes, no liquid or molten phase is present in the joint.

High Temperature Ceramic Putty

High Temperature Ceramic Putty is Smooth trowel able, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitations, chemicals and acids.

Product Feature’s :

Temperature range up to 177° C

Excellent for filling voids and rebuilding metal castings

Erosion / abrasion Resistance

Recommended High Temperature Ceramic Putty Application’s:

Fan Housing Repair
Filter Plate Repair
Pump Impeller Repair
Valve Repair
Metal Castings Repair

High Temperature Ceramic Putty Mixing Guide and applying Method :
1. Mix your High Temperature Ceramic Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of High Temperature Ceramic Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough High Temperature Ceramic Putty so that it extends higher than the original ceramic surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the High Temperature Ceramic Putty you filled the crack or chip with. Make sure to avoid sanding the area around the High Temperature Ceramic Putty. Sand until the High Temperature Ceramic Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

High Temperature Alumina Putty

High Temperature Alumina Putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications. This non-sagging, two-part epoxy is easily mixed and moulded to form odd shapes if required. Heavily reinforced with aluminum powder, it cures to a non-rusting aluminum-like finish, ideal for repairing aluminum parts.

Product Features:

Repairs air conditioning system components

Bonds to aluminum and many other metals

Fills porosity in aluminum castings

Can be machined drilled or tapped using conventional metalworking tools.

Recommended High Temperature Alumina Putty Application’s

Repairing aluminum castings.

Repairing worn aluminum parts.

Making aluminum dies.

High Temperature Alumina Putty Mixing Guide and applying Method :
1. Mix your High Temperature Alumina Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of High Temperature Alumina Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough High Temperature Alumina Putty so that it extends higher than the original Aluminum surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the High Temperature Alumina Putty you filled the crack or chip with. Make sure to avoid sanding the area around the High Temperature Alumina Putty Sand until the High Temperature Alumina Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Marine Putty

Marine Putty is the high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to the highest standards to meet the harsh demands of the marine and industrial environments, and solve many problems for home, auto and marine
applications. In salt or fresh water, outdoors or indoors, it provides improved resistance to moisture and is suited for repairs.

Product Features:

Resistant to most chemicals.

Certified for potable water application.

Non-rusting.

Bonds to ferrous and non-ferrous metals.

Can be drilled, sawed, filed and painted.

Recommended Marine Putty Putty Application’s

Repairs Hulls, Decks.

Water and Stock tanks

Repairs stainless steel holding tanks.

Bonds and repairs boats, water tanks, fish tanks.

Fish boxes.

Spas and Tubs.

Downspouts and Gutters.

Marine Putty Mixing Guide and applying Method :
1. Mix your Marine Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Marine Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Marine Putty so that it extends higher than the original Marine Putty surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Marine Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Marine Putty . Sand until the Marine Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Stainless Steel Putty is a Stainless Steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment. This Stainless steel - filled, non-sagging, two-part epoxy cures to a metal like finish. Used for making cost saving repairs on Stainless steel parts.

Product Features:

Acceptable for use in meat and poultry plants.

Can be machined.

Resistant to most chemicals.

Certified for potable water application.

Non-rusting.

Bonds to ferrous and non-ferrous metals.

Acceptable for use in meat and poultry plants.

Recommended Stainless Steel Putty Application’s

Repairs cracks, dents and breaks in stainless steel equipment, machinery or castings.

Rebuilds dairy equipment.

Repairs stainless steel holding tanks.

Stainless Steel Putty Mixing Guide and applying Method :
1. Mix your Stainless Steel Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Stainless Steel Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Stainless Steel Putty so that it extends higher than the original Stainless Steel surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Stainless Steel Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Stainless Steel. Sand until the Stainless Steel Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Copper Putty

Copper Putty is a hand-kneadable, fast-setting, copper-reinforced polymer compound for permanent repairs to copper, brass, Copper and other non-ferrous metals. It also bonds to wood, glass, masonry and many plastics. It comes in a handy form with the curing agent encapsulated in the contrasting color base material.

Product Features:

Won't sag or shrink

Easy to mix and use – rebuilds worn parts fast, reduces downtime

For repairs of Copper components without hampering the aesthetics

Ideal choice in place of brazing

Excellent bonding to Copper , alloys, brass, copper etc

Can be machined, drilled, and tapped.

Recommended Copper Putty Application’s

Patching non-structural defects in Copper castings

Sealing cracked castings, tanks, vessels and valves

Repairing holes

Rebuilding Copper Impellers

Renewing bolt and screw holes

Making models and jigs for holding odd shaped parts

Repairs and rebuilds areas where brazing would be undesirable or impossible

Bonds securely to Copper alloys, brass, copper, and ferrous metals.

Repair leaks in household water lines within minutes.

Fix freeze breaks in 15 minutes.

Seal pipes, elbows, joints, sleeves, traps and drains.

Join and seal copper rain gutters and downspouts.

Copper Putty Mixing Guide and applying Method :
1. Mix your Copper Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Copper Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Copper Putty so that it extends higher than the original Copper surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Copper Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Copper Putty . Sand until the Copper Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Bronze Putty is a bronze filled epoxy compound for patching, filling, bonding and rebuilding bronze surfaces. Cured material has a bronze like finish that can be machined, drilled, tapped or filled just like the original metal.

Product Features:

Won't sag or shrink

Easy to mix and use – rebuilds worn parts fast, reduces downtime

For repairs of bronze components without hampering the aesthetics

Ideal choice in place of brazing

Excellent bonding to bronze, alloys, brass, copper etc

Can be machined, drilled, and tapped

Recommended Bronze Putty Application’s

Patching non-structural defects in bronze castings

Sealing cracked castings, tanks, vessels and valves

Repairing holes

Rebuilding bronze Impellers

Renewing bolt and screw holes

Making models and jigs for holding odd shaped parts

Repairs and rebuilds areas where brazing would be undesirable or impossible

Bonds securely to bronze alloys, brass, copper, and ferrous metals

Epoxy Putty Mixing Guide and applying Method :
1. Mix your Bronze Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Bronze Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Bronze Putty so that it extends higher than the original Bronze surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Bronze Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Bronze Putty. Sand until the Bronze Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Aluminium Putty

Aluminium Putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications. This non-sagging, two-part epoxy is easily mixed and moulded to form odd shapes if required. Heavily reinforced with aluminum powder, it cures to a non-rusting aluminum-like finish, ideal for repairing aluminum parts.

Product Features:

Repairs air conditioning system components

Bonds to aluminum and many other metals

Fills porosity in aluminum castings

Can be machined drilled or tapped using conventional metalworking tools.

Recommended Aluminium Putty Application’s

Repairing aluminum castings.

Repairing worn aluminum parts.

Making aluminum dies.

Aluminium Putty Mixing Guide and applying Method :
1. Mix yourAluminium Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Aluminium Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Aluminium Putty so that it extends higher than the original Aluminium surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Aluminium Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Aluminium Putty. Sand until the Aluminium Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Ceramic Carbide Putty

Ceramic Carbide Putty is the original metal-filled epoxy used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.

Monarch's Ceramic Carbide Putty is reinforced epoxy putty. Dries steel hard in 15 minutes. Ready to drill, tap, file machine etc. After one hour, Permanent repairs to metal, glass, plastic, ceramic, more bonds like epoxy, harden like steel. Monarch's Ceramic Carbide Putty is sets up Under water, impervious to chemicals

Product Feature’s

Bonds to most metals, concrete and some plastics.
Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted.
Excellent resistance to oil, gasoline, water and many chemicals.
Long Pot Life Repairs.

Recommended Ceramic Carbide Putty Application’s

Metal Tube Sheet Repair
Bearing Race Repair
Water Box Channel Repair
Oil Pipe Line Corrosion Repair

Ceramic Carbide Putty Mixing Guide and applying Method :
1. Mix your Ceramic Carbide Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Ceramic Carbide Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Ceramic Putty so that it extends higher than the original ceramic surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Ceramic Carbide Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Ceramic Carbide Putty. Sand until the Ceramic Carbide Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Multipurpose Epoxy Putty

Multipurpose Epoxy Putty is a two-part adhesive consisting of an epoxy resin putty and a hardener putty which are mixed by kneading. They react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. SavesPast MEP - Multipurpose Epoxy Putty does not shrink and is resistant to most common solvents. It can bond to damp surfaces and cure under water. SavesPast MEP - Multipurpose Epoxy Putty can be sanded, drilled and painted.

Recommended Multipurpose Epoxy Putty Application’s :

Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive parts, pools and cracks in concrete.
Bonding metal, masonry, brick, wood, glass, ceramic, rubber, fiberglass composite, china, stone, marble and many rigid plastics
Salt water and fresh water immersion resistance, Ballast tanks, offshore and marine structures
Bilges and wet void areas, Above - and below- water hull areas Decks and superstructures, Water and waste water tanks

Mixing Instructions :

1. Mix your Multipurpose Epoxy Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Multipurpose Epoxy Putty and begin pressing it into the crack . Press enough Multipurpose Epoxy Putty so that it extends higher than the original surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Multipurpose Epoxy Putty you filled the crack. Make sure to avoid sanding the area around the Multipurpose Epoxy Putty. Sand until the Multipurpose Epoxy Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Flex Putty

Flex Putty is a polyurethane based product used for repairing rubber parts and equipment. These offer outstanding resistance against wear caused due to impact and coarse particle abrasion.

Flex Putty is premium polyester finishing glaze that provides superior adhesion with excellent flexibility on plastics. Flex Putty produce excellent feather edge results on plastics, metal SMC, fiberglass, cured primer and paint. Use to fill pinholes, dings, scrapes, sanding scratches and more. Putty Flex sands easily and resists clogging sandpaper.

Flex Putty Product Feature’s

Flex Putty is Environment-friendly
Strong bonding force
Strong anti-cracking and Waterproof
Good weather-resistant
Abrasion Resistant, Wear-Resistant

Recommended Flex Putty Application’s

Repairing conveyor Belt Damages
Slurry pumps,
Insulation Cables
Butterfly Valve
Cyclone
Rubber lined tank
Rubber rollers

Mixing Instructions

1. Mix your Flex Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Flex Putty and begin pressing it into the crack. Press enough Flex Putty so that it extends higher than the original surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Flex Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Flex Putty. Sand until the Flex Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Steel Putty

Steel Putty is the original metal-filled epoxy used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.

Steel Putty is reinforced epoxy putty. Dries steel hard in 15 minutes. Ready to drill, tap, file machine etc. After one hour, Permanent repairs to metal, glass, plastic, ceramic, more bonds like epoxy, harden like steel. Monarch's Steel Putty is sets up Under water, impervious to chemicals

Steel Putty Product Feature’s

Bonds to most metals, concrete and some plastics.
Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted.
Excellent resistance to oil, gasoline, water and many chemicals.
Long Pot Life Repairs.

Recommended Steel Putty Application’s

Metal Tube Sheet Repair
Bearing Race Repair
Water Box Channel Repair
Oil Pipe Line Corrosion Repair

Mixing Instructions

1. Mix your Steel Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Steel Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Ceramic Putty so that it extends higher than the original ceramic surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Steel Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Steel Putty. Sand until the Steel Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Titanium Putty

Titanium Putty is used to reclaim worn out machinery and process equipments. This is multipurpose putty which is specially formulated to offer high compressive strength and resistance from chemicals. These are recommended for the most critical repair and reclamation works.

Titanium Putty Product Feature’s

Excellent temperature resistance 177° C
High compressive strength (15,200 psi)
All Purpose Engineering Repairs
Resistance to chemicals and most acids, bases, solvents, and alkali's

Recommended Titanium Putty Application’s

Coupling Bolt Repair
Paddle Wheel Shaft / Hub Repair
Pump Repair
Water Box Channel Repair
Bearing Seat & Housing
Shaft
Pipe elbow
Oil Cooler
Heat Exchanger
Offline leakages
Motor end Covers and Compressors.

Mixing Instructions

1. Mix your Titanium Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Titanium Putty and begin pressing it into the crack. Press enough Titanium Putty so that it extends higher than the original surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Titanium Putty you filled the crack. Make sure to avoid sanding the area around the Titanium Putty. Sand until the Titanium Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.

Ceramic Putty

Ceramic Putty is Smooth trowel able, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals and acids.

Product Feature’s :

Temperature range up to 177° C
Excellent for filling voids and rebuilding metal castings
Erosion / abrasion Resistance

Recommended Ceramic Putty Application’s:

Fan Housing Repair
Filter Plate Repair
Pump Impeller Repair
Valve Repair
Metal Castings Repair

Metal Reclamation Putty

The down-time, shut down, profit loss, energy decline, safety hazards pose major threat to many Industries. Monarch's SavesPast range of Metal Reclamation Putties offers wide range of products and service during routine and unexpected maintenance to solve the maintenance issues that arise from machinery and equipment break-downs and failures across wide spectrum of Industries. These 2 component epoxy putties containing Resin and Hardener which after mixing hardens to a firm metal like material, well adhering to almost any kind of surface. It rebuilds worn-out surface to the original specifications, in most of the cases in less than 2 hours down-time saving huge inventory / replacement cost. The surface of the base substrate is not altered as in case of soldering or welding and no thermal stresses are induced during repair. The cured mass can be painted, sanded, machined, tapped, ground, filed or drilled.

Steel Putty Application on Broken Metal Pipe

Salient Features of Metal Reclamation Putties

The key feature are: Rehabilitation instead of replacement, Safety enhancement as no dangers of hot work, In-situ application - do jobs right on production line, fast and economical repairs, ease in application procedures, permanent solutions to countless applications, increased reliability, reduce the cost of plant shutdown, match metal color, excellent resistance to aggressive chemicals, high compressive strength for mechanical applications.

Application Area Of Metal Reclamation Putty

Pipes
Tanks
Pump Impeller and casings
Heat exchangers
Oil coolers
Tube Sheets
Water boxes and End Covers
Valves
Chutes and hoppers
Agitators
Process Vessels
ID fans
shafts
Bearing Housings
Flange Faces
Engine Blocks
Tank Seams
Radiators
Bow thrusters
Kort Nozzles
Struts and rudders
Guide valves
Hoppers
Rubber parts like conveyor belts.
Rubber rollers
Gaskets
Off road tires
Rubber impellers
Flexible ducting
Butterfly valves
Rubber Hoses

Facebook

Sample Text

Unordered List

Friday 22 November 2013

Thursday 21 November 2013

Tuesday 29 October 2013

Tuesday 8 October 2013

Metal Reclamation Putty

Salient Features of Metal Reclamation Putties

Application Area Of Metal Reclamation Putty

Contact Us

Popular Posts

Recent Posts

Definition List

Text Widget

Blog Archive

About Me