Tuesday, 29 October 2013

Stainless Steel Putty

Stainless Steel Putty is a Stainless Steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment. This Stainless steel - filled, non-sagging, two-part epoxy cures to a metal like finish. Used for making cost saving repairs on Stainless steel parts.

Product Features:

  • Acceptable for use in meat and poultry plants.
  • Can be machined.
  • Resistant to most chemicals.
  • Certified for potable water application.
  • Non-rusting.
  • Bonds to ferrous and non-ferrous metals.
  • Acceptable for use in meat and poultry plants.

Recommended Stainless Steel Putty Application’s

  • Repairs cracks, dents and breaks in stainless steel equipment, machinery or castings.
  • Rebuilds dairy equipment.
  • Repairs stainless steel holding tanks.

Stainless Steel Putty Mixing Guide and applying Method :
1. Mix your Stainless Steel Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Stainless Steel Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Stainless Steel Putty so that it extends higher than the original Stainless Steel surface. Allow it to dry according to the drying time.
3. Take a piece of medium grade sandpaper, and gently sand down the Stainless Steel Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Stainless Steel. Sand until the Stainless Steel Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.


Post a Comment