Bronze Putty is a bronze filled epoxy compound for patching, filling, bonding and rebuilding bronze surfaces. Cured material has a bronze like finish that can be machined, drilled, tapped or filled just like the original metal.
- Won't sag or shrink
- Easy to mix and use – rebuilds worn parts fast, reduces downtime
- For repairs of bronze components without hampering the aesthetics
- Ideal choice in place of brazing
- Excellent bonding to bronze, alloys, brass, copper etc
- Can be machined, drilled, and tapped
Recommended Bronze Putty Application’s
- Patching non-structural defects in bronze castings
- Sealing cracked castings, tanks, vessels and valves
- Repairing holes
- Rebuilding bronze Impellers
- Renewing bolt and screw holes
- Making models and jigs for holding odd shaped parts
- Repairs and rebuilds areas where brazing would be undesirable or impossible
- Bonds securely to bronze alloys, brass, copper, and ferrous metals
Epoxy Putty Mixing Guide and applying Method :
1. Mix your Bronze Putty in compliance with the instructions in plastic bowl.
2. Take a small piece of Bronze Putty and begin pressing it into the crack or chip in your ceramic piece. Press enough Bronze Putty so that it extends higher than the original Bronze surface. Allow it to dry according to the drying time.
3. Take a piece of medium grade sandpaper, and gently sand down the Bronze Putty you filled the crack or chip with. Make sure to avoid sanding the area around the Bronze Putty. Sand until the Bronze Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.
0 comments:
Post a Comment