Multipurpose Epoxy Putty

Multipurpose Epoxy Putty is a two-part adhesive consisting of an epoxy resin putty and a hardener putty which are mixed by kneading. They react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. SavesPast MEP - Multipurpose Epoxy Putty does not shrink and is resistant to most common solvents. It can bond to damp surfaces and cure under water. SavesPast MEP - Multipurpose Epoxy Putty can be sanded, drilled and painted.

Recommended Multipurpose Epoxy Putty Application’s :

•     Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive       parts, pools and cracks in concrete.
•     Bonding metal, masonry, brick, wood, glass, ceramic, rubber, fiberglass composite, china, stone,        marble and many rigid plastics
•     Salt water and fresh water immersion resistance, Ballast tanks, offshore and marine structures
•     Bilges and wet void areas, Above - and below- water hull areas Decks and superstructures, Water     and waste water tanks  

Mixing Instructions :

1. Mix your Multipurpose Epoxy Putty in compliance with the instructions in plastic bowl.

2. Take a small piece of Multipurpose Epoxy Putty and begin pressing it into the crack . Press enough Multipurpose Epoxy Putty so that it extends higher than the original surface. Allow it to dry according to the drying time.

3. Take a piece of medium grade sandpaper, and gently sand down the Multipurpose Epoxy Putty you filled the crack. Make sure to avoid sanding the area around the Multipurpose Epoxy Putty. Sand until the Multipurpose Epoxy Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.