Titanium Putty is used to reclaim worn out machinery and process equipments. This is multipurpose putty which is specially formulated to offer high compressive strength and resistance from chemicals. These are recommended for the most critical repair and reclamation works.
Titanium Putty Product Feature’s
Mixing Instructions
1. Mix your Titanium Putty in compliance with the instructions in plastic bowl.
2. Take a small piece of Titanium Putty and begin pressing it into the crack. Press enough Titanium Putty so that it extends higher than the original surface. Allow it to dry according to the drying time.
3. Take a piece of medium grade sandpaper, and gently sand down the Titanium Putty you filled the crack. Make sure to avoid sanding the area around the Titanium Putty. Sand until the Titanium Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.
Titanium Putty Product Feature’s
- Excellent temperature resistance 177° C
- High compressive strength (15,200 psi)
- All Purpose Engineering Repairs
- Resistance to chemicals and most acids, bases, solvents, and alkali's
Recommended Titanium Putty Application’s
- Coupling Bolt Repair
- Paddle Wheel Shaft / Hub Repair
- Pump Repair
- Water Box Channel Repair
- Bearing Seat & Housing
- Shaft
- Pipe elbow
- Oil Cooler
- Heat Exchanger
- Offline leakages
- Motor end Covers and Compressors.
1. Mix your Titanium Putty in compliance with the instructions in plastic bowl.
2. Take a small piece of Titanium Putty and begin pressing it into the crack. Press enough Titanium Putty so that it extends higher than the original surface. Allow it to dry according to the drying time.
3. Take a piece of medium grade sandpaper, and gently sand down the Titanium Putty you filled the crack. Make sure to avoid sanding the area around the Titanium Putty. Sand until the Titanium Putty is at the same level as the rest of the surface so the two surfaces are cohesive with each other.
0 comments:
Post a Comment